CURRENT POSITION:HOME PAGE>PRODUCTION LIST>Drying & Coating>Single Conical Spiral Vacuum Drying Equipment（CE）

Single Conical Spiral Vacuum Drying Equipment (CE Approved)

1. Description ：

Single-conical spiral vacuum dryer is a jacket conduction heating batch mode drying equipment, it is widely used vacuum drying equipment in the pharmaceutical production, the drying equipment with vacuum drying and mixing double function. After the material is added from the top inlet , the feed inlet is closed, the heating system is started, the vacuum system, the stirring system, the vertical conical shape screw is rotating , The material moves upwards under the spiral lifting, The inner wall of the cone in full contact with the material, the material and the internal wetting temperature increases, in the vacuum state, the boiling point of moisture decreased , evaporation of the moisture been taken out by vacuum under low temperature , then complete the drying process.

2. Featurs：

Single- conical spiral vacuum dryer suit for use in the GMP workshop, the machine has a high dry & mixing efficiency , The dryer directly connected to the filter can retain the dust in the processing area, the machine uses inflatable sealed dome valve, discharge thoroughly, convenient, excellent vacuum, pressure sealing performance, no dead ends, easy to clean design, performance Stable, long service life, able to handle products without loss.
Full Cantilever Conical Stirring Screw
Fully enclosed system
Product mixing under slow speed , well distributed
Use a variety of materials and techniques to achieve a safe and reliable seal
Low mechanical shear force
Short Drying time , low energy consumption
High precision, good mixing effect, strong renewable
No pollution gas leaks
Applicable to the various products, widely used
Adjust the speed according to product characteristics
Can be flexible load rate (10-100%), no affect on product quality
Use the heating screw shaft to shorten the drying time
Solid discharge and cleaning fluid discharge without residue
To ensure the safety of products, operators and production processes
CIP is simple and efficient, thoroughly discharge
Can be used for a variety of products processing

3. Scope of application：

Flowable products: powder, particles, crystals and other

dangerous material

For mechanical handling and high temperature sensitive products                                       

Flammable and explosive powders

Oxidized products are easily decomposed

4.Technical parameter

5.Discharge valve(Inflatable dome valve)